Pima FORCE Installation Guide

Force Security System - Installation Guide
10.1 Programmable Output Types
System Configuration  Timers and Counters  Programmable Output Types
See Programmable Output Types , on page 50, for details on all the programmable output types.
The default alarms and sirens programmable output types match the default zone
types, and should not be changed in most installations.
Each Programmable output types’ timer has 3 options:
Time (sec)
Description
Use example
0
The output type will activate the physical
output until the alarm system is disarmed.
Turning a floodlight on
1-9998
The output type will activate for the set
time.
Fire Alarm: escape door opening
9999
The output type will activate for as long as
the source event exist.
AC Fault: flashlight indication
Programmable output type
Default
 Alarms
Burglary
240
Panic
Silent Panic
Fire
Medical
Duress
Anti-mask
Tamper Alarm
 Custom Zone Types 1-5
 Faults
Any Fault
9999
AC Fault
Low Battery
Phone line/Net
GSM Module
Communication
Tamper
240
Programmable out type
Default
External Siren
240
Internal Siren
Zone Bypass
9999
Smoke Reset
60
Chime
3
Output-Keyfob
5
Energy Saving
10
15 min
Invalid Code
5
 Operation Codes 1-8
10
See the Glossary , on page 54.

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English