Pima FORCE Installation Guide

Force Security System - Installation Guide
38
Chap. 9 Faults
The Faults menu includes the following sub-menus:
1)  AC Fault. See below.
2)  Low Battery. See AC Loss below.
3)  Phone Line Fault. See AC Loss below.
4)  Network Fault. See AC Loss below.
5)  GSM Module Fault. See AC Loss below.
6)  CMS Comm. Fault. See AC Loss below.
7)  Tamper Open. See AC Loss below.
8)  Invalid Code. See AC Loss below. This event is generated when a user exceeds the Code
Keystrokes counter, without a valid code. See Timers and Counters on the next page.
9)  Other Faults. See AC Loss below.
9.1 AC Fault
System Configuration  Faults  AC Fault
Parameter
Details
Attributes
See section 6.2.1, on page 29.
Notification Delay
Set time in minutes to delay notifications to the CMS and the contacts. The
delay also applies to activating outputs and the keypad’s buzzer. Range:
0-250.
Report Time Span
Set a time span in which the fault will be reported. This feature is useful
when large scale faults, such as a wide outage occur, to prevent report
overloading at the CMS.
Audible
Notification
Select the notification when alerting the contacts by phone:
 Alarm Tone: hi-lo sound

Pima FORCE Specifications

General

Brand	Pima
Model	FORCE
Category	Security System
Language	English