Polaris A09BG50AA User Manual

BRAKES
9.18
REAR CALIPER
REMOV
AL/INSPECTION
1. Clean caliper area before removal.
2. Remove hand brake (inner) and auxiliary brake
(outer) lines. Place a container to catch brake
fluid draining from brake lines.
Remove Lines
3. Remove the two caliper bolts and the caliper.
Remove
Bolts
4. Remove the slide bolt snap rings (A), the slide
pins (B), the bracket pad (C), and the brake pads
(D).
A
Caliper
B
C
D
5. Remove the anvil bolts and separate caliper
halves and remove pistons with piston pliers.
Seal
Piston & O--rings
Caliper
Anvil Bolts
6. Remove seals and O-rings. Clean the O-ring
grooves.
7. Clean disc, caliper body, and pistons with brake
cleaner or alcohol.
8. Remove the slide bolt bushings. Inspect the
bushings and O--rings and replace if necessary.
Bushin g
O-- ring

Polaris A09BG50AA Specifications

General

Brand	Polaris
Model	A09BG50AA
Category	Offroad Vehicle
Language	English