8.39
Steering and Suspensions
8
IQ 121 Heavy Torsion Spring Installation
Please reference the following information when installing
heavy torsion springs on IQ sleds. The issue that arises when
installing the heavy spring on a Fusion sled is that the coil stack
of the torsion spring is wide enough to interfere with the
suspension arm clamp nut. To work around this issue you will
need to order two (one for each side) of the following parts.
Relocate the two washers that are next to the clamp nut to the
outside of the link arm.
To Next Page
Loading...
Need help?
General
