Polaris RZR XP 1000 2017 Service Manual

5
9928492 R04 - 2017-2018 RZR XP 1000 / XP4 1000 Service Manual
© Copyright Polaris Industries Inc.
5.17
CAUTION
Never shim a drive clutch spring to increase its
compression rate. This may result in complete stacking
of the coils and subsequent clutch cover failure.
The drive clutch spring is one of the most critical
components of the PVT system. It is also one of the
easiest to service. Due to the severe relaxation the
spring is subject to during operation, it should always
be inspected for tolerance limits during any clutch
operation diagnosis or repair.
Check to see that spring coils are parallel to one
another using a straight-edge. Distortion of the
spring indicates stress fatigue, requiring
replacement.
NEEDLE BEARING INSPECTION
1. Rotate the clutch bearing. The non-braking needle
bearing should rotate on the shaft with only a slight
amount of drag.
NOTE
The clutch bearing is a one-way bearing.
2. Verify there is no binding or rough spots. If problems
are noted continue with disassembly.
PVT SYSTEM

Polaris RZR XP 1000 2017 Specifications

General

Brand	Polaris
Model	RZR XP 1000 2017
Category	Automobile
Language	English