2
2.37
9924864 - 2012-2014 SPORTSMAN 800 / 6X6
© Copyright 2013 Polaris Sales Inc.
CV Shaft Boot Inspection
Inspect the CV shaft boots in the front and rear of the
ATV for damage, tears, wear, or leaking grease. If the
rubber boot exhibits any of these symptoms, replace the
boot. Refer to Chapter 7 for CV boot replacement, or
have your Polaris dealer replace the boot.
ATV Controls
Check controls for proper operation, positioning and
adjustment.
Brake control and switch must be positioned to allow
brake lever to travel throughout entire range without
contacting switch body.
Wheel Inspection
Inspect all wheels for runout or damage. Check wheel
nuts and ensure they are tight. Do not over tighten the
wheel nuts.
ITEM
SPECIFICATION
Steel - Front and Rear
Wheel Nuts
27 ft-lbs (37 Nm)
Aluminum - Front and
Rear
Wheel Nuts
30 ft-lbs + 1/4 Turn
(41 Nm + 1/4 Turn)
Front Hub Retaining Nut
60 ft-lbs (81 Nm)
Rear Hub Retaining Nut
80 ft-lbs (108 Nm)
MAINTENANCE
To Next Page
Loading...
Need help?
General
