Raisecom ISCOM2600G (A) Series User Manual

Raisecom
ISCOM2600G (A) Series Product Description
6 Appendix
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
78
Table 6-16 Parameters of 10 Gbit/s SFP+ optical module
Model
Wavelength
(nm)
Rx
type
Tx
optical
power
(dBm)
Maximum
optical
power
Extinction
ratio (dB)
Rx
sensitivity
Maximum
transmission
distance
USFP+-
192/M/S
W
850
PIN
-7.3 to -
1.0
-1.0
3.0
-11.1
0.3
USFP+-
192/S1/
SW
1310
PIN
-8.2 to
0.5
0.5
3.5
-12.6
10
USFP+-
192/S2/
SW
1550
PIN
-3.5 to
4.0
4.0
6.0
-16.0
40
USFP+-
192/S3/
SW
1550
PIN
-1.0 to
4.0
4.0
9.0
-23.0
80
6.3 Terms
A
Access Control List
(ACL)
A series of ordered rules composed of permit | deny sentences.
These rules are based on the source MAC address, destination
MAC address, source IP address, destination IP address,
interface ID, etc. The device decides to receive or refuse the
packets based on these rules.
Auto-negotiation
The interface automatically chooses the rate and duplex mode
according to the result of negotiation. The auto-negotiation
process is: the interface adapts its rate and duplex mode to the
highest performance according to the peer interface, that is, both
ends of the link adopt the highest rate and duplex mode they
both support after auto-negotiation.
B
Bracket
It is a component at the flank side of the device, used for
installing the chassis into the rack.
D

Raisecom ISCOM2600G (A) Series Specifications

General

Brand	Raisecom
Model	ISCOM2600G (A) Series
Category	Switch
Language	English