Raymarine Autohelm 100 User Manual

Chapter 2: Installation
65
labelled clutch and motor as shown.
D912-1
lk CLUTCH MOTORPOWER
+–+ –
12
Blue
Brown
Black
Red
2.9 Auxiliary Alarm
The auxiliary alarm is waterproof and, therefore, can be mounted in
any position. A foam seal on the mounting flange ensures a watertight
joint to the mounting surface.
The auxiliary alarm must be connected to the system via an NMEA
interface.
1. Drill a 7/8in (22mm) diameter hole through the mounting panel
as shown.
2. Pass the two way connector block and cable through the drilled
hole.
3. Mount the auxiliary alarm in position using the four self tapping
screws (supplied).

Raymarine Autohelm 100 Specifications

General

Brand	Raymarine
Model	Autohelm 100
Category	Autopilot System
Language	English