STOP
Button
PAUSE
Button
_REW
Button
Po_ver POWER
Indicator (VCR/OFF/
CAMERA)
Switch
Trigger
10.
Start and stop recording.
• Press and release the thumb trigger
to start recording. _,_ appears in
the viewfinder, and the tally light
will light when the camcorder is
recording.
• Press and release the thumb trigger
again to stop recording. The
camcorder is now in the record-
pause mode ( _----PAUSE------appears in
the viewfinder).
11. Play back what you have
recorded.
• Place the POWER switch in VCR.
• Press REW to rewind the tape.
• Press PLAY/PAUSE to play back
the tape in the viewfinder.
• Press STOP when you are finished
playing back the tape.
• Details on viewfinderplayback are
on page 58.
12. Place the POWER switch in
OFF to turn off the
camcorder.
The power indicator will turn off.
13. Close the lens cover.
To Next Page
Loading...
Need help?
General
