EJECT
Button
Tape Wheel
LENS
Cover
Control
PUSH Here
to Close
Tape Window
Handstrap
POWER
Switch and Handstrap Velcro
Indicator Strip (Under Flap)
4. Adjust the handstrap to fit
your hand.
• Lift the flap on the handstrap and
separate the velcro strip.
• Insert your hand, adjust the strap
to fit snugly, refasten the strap, and
close the flap.
5. Slide LENS COVER control
to open lens cover.
6. Place POWER (CAMERA/
OFF/VCR) switch
in CAMERA.
• The power indicator will light and
the camcorder will enter record
pause. = PAUSE:= appears in the
viewfinder when the camcorder is
in record pause.
• The position of this switch tells
the camcorder whether you want
to record (CAMERA), turn the
power off (OFF), or play back
tapes (VCR).
• The camcorder will automatically
turn off if it remains in record
pause for five minutes. Place
POWER in OFF and then back in
CAMERA.
(continued on next page)
5
To Next Page
Loading...
Need help?
General
