Using the Adapter/Charger to Power Your Camcorder
The adapter/chargerattaches to the camcorder and lets you power your camcorder
directly from standard household power. The adapter/charger operates on 100-240
volts, 50160 Hz, so it can be used virtually anywhere in the world to power the
camcorder or recharge the battery.
'.: . : " .: -
. -..- • .
To AC 100-240V, 50/60 Hz
DC Cable
POWER
Indicator
DC OUT
Jack
Attach Adapter/Charger
1. Connect one end of the DC cable to
the DC OUT jack on the adapter/
charger.
2. Connect the other end of the DC cable
to the DC injack on the camcorder as
shown above.
3. Plug the adapter/charger's plug into
the nearest AC outlet (100-240V,
50/60Hz).
4. If the adapter/charger is properly
connected, its POWER indicator
will light.
Remove Adapter/Charger
1. Unplug the adapter/chargerfrom the
wall outlet.
2. Remove the DC cable from the
adapter/charger and camcorder.
Using an Optional Plug Adapter
An optional plug adapter may be required
in some countries.
J
OptionalAC AC 100-240V
Plug Adapter
1. Plug the adapter/charger's plug into
the AC plug adapter.
2. Plug the AC plug adapter into the AC
outlet.
12
To Next Page
Loading...
Need help?
General
