msh> netware mode rp
NDS context name
msh> netware context “character string”
SAP interval
msh> netware “sap_interval[0-3600]”
It can be entered between 0 and 3600 seconds.
Setting login mode for file server
msh> netware login server
Setting login mode for NDS tree
msh> netware login tree
Setting login mode for NDS tree name
msh> netware tree “NDS tree name”
File transfer protocol
msh> netware trans {ipv4pri|ipxpri|ipv4|ipx}
• If you do not specify the protocol, the current setting is displayed.
Protocol Set Protocol
ipv4pri IPv4+IPX(IPv4)
ipxpri IPv4+IPX(IPX)
ipv4 IPv4
ipx IPX
pathmtu
Use the “pathmtu” command to display and configure the PathMTU Discovery service function.
View settings
msh> pathmtu
Configuration
msh> pathmtu {on|off}
• The default is “on”.
• If the MTU size of the sent data is larger than the router's MTU, the router will declare it
impassable, and communication will fail. If this happens, selecting the “pathmtu” to “on”
optimizes the MTU size and prevents data output failure.
4. Monitoring and Configuring the Printer
174
To Next Page
Loading...
Need help?
General
