When using direct print from a memory storage device
Message Cause Solution
"Exceeded the limit value for
total data size of the selected
files. Cannot select more files."
• The size of the selected file
exceeds 1 GB.
• The total size of the
selected files exceeds 1
GB.
Files or groups of files larger
than 1 GB cannot be printed.
• When the total size of the
multiple files that are
selected exceeds 1 GB,
select files separately.
• When the size of the
selected file exceeds 1
GB, print from a memory
storage device using a
function other than the
Direct printing function.
You cannot select files of
different formats at the same
time.
"Unable to access the specified
memory storage device."
• An error occurred when
the machine accessed the
memory storage device or
a file stored on the memory
storage device.
• An error occurred when
the user used the Direct
printing function to print
from a memory storage
device.
Save the file to a different
memory storage device, and
then print again.
Messages Printed on the Error Logs or Reports When You Use the Printer
Function
This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Messages Displayed When You Use the Printer Function
141
To Next Page
Loading...
Need help?
General