2. On the [Group] menu, point to [Search Device], and then click [IPv4], [IPX/SPX] or [IPv4
SNMPv3].
A list of printers using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
If you are using IPv4 SNMPv3, enter the user authentication.
3. In the list, select a printer whose configuration you want to change.
4. On the [Tools] menu, point to [Device Settings], and then click [Paper].
A Web browser opens and the window for entering the login user name and password for the Web
Image Monitor administrator appears.
5. Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your administrator.
The [Paper] page appears.
Select a paper type in the [Paper Type] list for each tray.
6. Enter required setting items, and then click [OK].
7. Click [Logout].
8. Quit Web Image Monitor.
9. Quit SmartDeviceMonitor for Admin.
• For details about Web Image Monitor, see “Using Web Image Monitor”.
• For details about setting items, see Help in the [General Settings] on [Configuration] page.
• p.185 "Using Web Image Monitor"
Managing User Information
Follow the procedure below to manage the user's information using SmartDeviceMonitor for Admin.
Prints jobs can be managed and functions restricted by user codes.
Starting User Management Tool
Follow the procedure below to start User Management Tool.
1. Start SmartDeviceMonitor for Admin.
5. Monitoring and Configuring the Printer
198
To Next Page
Loading...
Need help?
General