Changing to EtherTalk
Follow the procedure below to configure to a Mac OS to use EtherTalk.
1. Open [Control Panel], and then double-click the Apple Talk icon.
2. On the [Connect via:] pop-up menu, click [Ethernet].
3. If you change zones, select a name on the [OK] pop-up menu.
4. Close the Apple Talk control panel.
5. Restart the computer.
• The procedures used to configure Mac OS may vary depending on the Mac OS version. The
following describes how to configure Mac OS 9.1. If you are using a different version of Mac
OS, use the following procedures as a reference and see the manuals for your Mac OS version.
• Confirm the Connection to the Printer with TCP/IP.
• For information about installing applications required for EtherTalk, see the Mac OS manuals.
Mac OS
297
To Next Page
Loading...
Need help?
General