5. Close Web Image Monitor.
• The SSL/TLS encrypted communication mode can also be specified using Web Image Monitor. For
details, see Web Image Monitor Help.
SNMPv3 Encryption
This can be specified by the administrator.
When using SmartDeviceMonitor for Admin or another application to make various settings, you can
encrypt the data transmitted.
By making this setting, you can protect data from being tampered with.
1. Log on to Web Image Monitor in the administrator mode.
2. Click [Configuration].
3. Click [Network Security] in the "Security" area.
4. Click [Encryption Only] in the "Permit SNMPv3 Communication" area in the "SNMP" area,
and then click [OK].
5. Close Web Image Monitor.
• To use SmartDeviceMonitor for Admin for encrypting the data for specifying settings, you need to
specify the administrator's [Encryption Password] setting and [Encryption Key] in [SNMP
Authentication Information] in SmartDeviceMonitor for Admin, in addition to specifying [Permit
SNMPv3 Communication] on the machine. For details about specifying [Encryption Key] in
SmartDeviceMonitor for Admin, see SmartDeviceMonitor for Admin Help.
• If administrator's [Encryption Password] setting is not specified, the data for transmission may not be
encrypted or sent.
8. Security Measures Provided by this Printer
344
To Next Page
Loading...
Need help?
General