Ricoh Ri 2000 User Manual

4. Adjustments RICOH Ri 2000 User Manual
174
Adjustment tips
If the print is misaligned even after the adjustment, it is recommended to adjust it according to the
thickness of the medium (T-shirt, etc.) to be printed.
1. Set the medium to be printed on the platen, and then perform HEIGHT ADJUST.
2. Remove the media from the platen.
3. Add plain paper to the back side of the transparent OHP sheet until it becomes the
same height as the medium used for printing, and then fix it with tape to prevent it
from slipping. At this time, be careful not to cause warping or floating.
4. Perform the adjustment using the OHP sheet with plain paper set in Step 3. The
subsequent procedure is the same as the normal adjustment procedure.
NOTE - You can reset adjustment value (Head Alignment / Table Alignment / Print Position) to the original
settings by pressing [FACTORY RESET] by going to the Settings tab and pressing [OPTION].
For details, see page 47, "Settings Tab".

Ricoh Ri 2000 Specifications

General

Brand	Ricoh
Model	Ri 2000
Category	Printer
Language	English