1. Before You Begin RICOH Ri 2000 User Manual
32
After completing the initial ink charging, proceed to the next step.
Turning Off the Power
1. To turn off the power, hold down the sub power button for more than 3 seconds,
which is located at the front near the touch panel.
IMPORTANT! When you press the sub power button, the following screen warning appears.
If the power is left off for an extended period of time, the automatic maintenance function will not
be carried out properly, which may result in nozzle clogging.
If the power needs to be turned off for more than 12 hours, be sure to attach the head protection
cover to the white print head.
If the power needs to be turned off for more than 2 weeks, install a cleaning cartridge to replace
the white ink inside the printer with cleaning solution, and then install the head protection cover
on the white carriage.
If the power needs to be turned off for more than 3 months, install a cleaning cartridge and
replace the color ink inside the printer with cleaning solution as well.
Power OFF
duration
White carriage Color carriage
Less than 12 hours Still in white ink Still in color ink
More than 12 hours,
less than 2 weeks
Install head protection cover Still in color ink
More than 2 weeks,
less than 3 months
After replacing with cleaning
solution, install head protection
cover
Still in color ink
More than 3 months After replacing with cleaning
solution, install head protection
cover
Replace with
cleaning solution
For instructions on how to replace the cleaning solution, see page 190. "Preparing Your Printer
for Storage/Shipping" and for instructions on how to install the head protection cover, see page
213 "Installation of the head protection cover".
To Next Page
Loading...
Need help?
General