Ricoh Ri 2000 User Manual

1. Before You Begin RICOH Ri 2000 User Manual
77
Click on the [Print Mode] tab, and then specify [White] in [Special Colors].
< White >
• Off
Not printing white.
• Brightness - Black Substrate
Select this when using the black color on black materials for printing.
The black material is used for the black part of the image data. Thus, you can save on
white and black ink consumption.
• Brightness
Select this when not using the color of the material for printing when printing on red,
blue, or other deep color materials. Black ink is discharged for the black part of the
image data. To prevent the influence of the material's color, it is required to apply white
ink as the undercoat. If applying white ink, enter the value in [Minimum]. (Recommended
value: 60)
* The optimal value depends on the type of material. Adjust the value as required.
• Other settings, such as Pixel, Pixel invert, Selective, Filling, Flood, and Spot
See the operation manual for ColorGATE Productionserver or the help file.
(Help file: Processing Print Jobs > White and special colors > Printing Special Colors:
Introduction)

Ricoh Ri 2000 Specifications

General

Print Technology	Inkjet
Ink Type	Pigment Ink
Connectivity	USB, Ethernet
Operating System Compatibility	Windows
Weight	250 lbs
Printhead	Ricoh
Print Resolution	1200 x 1200 dpi
Substrate Compatibility	Cotton, Polyester, Blends
Power Requirements	AC 100-240V, 50/60 Hz