Rigol MSO8000 Series User Manual

Chapter 11 Digital Channel RIGOL
MSO8000 User Guide 11-1
Chapter 11 Digital Channel
MSO8000 series oscilloscope has a standard configuration of the logic analyzer (LA)
function, and it has 16 digital channels. The default channel label is D15-D0. The
oscilloscope compares the voltages acquired in each sample with the preset logic
threshold. If the voltage of the sample point is greater than the threshold, it will be
stored as logic 1; otherwise, it will be stored as logic 0. The oscilloscope displays
logic levels ("1" and "0") in the form of a graph for you to easily detect and analyze
the errors in circuit design (hardware design and software design).
Before using the digital channels, connect the oscilloscope and the device under test
using RPL2316 logic probe provided in the accessories. To apply to different
application scenarios, RPL2316 provides three connection methods to connect the
signal under test. For details, refer to RPL2316 Logic Probe User Guide .
Note: The digital channel input terminal does not support hot plug. Please do not
insert or pull out the logic probe when the instrument is powered on.
Contents in this chapter:
◼ To Select the Digital Channel
◼ To Enable/Disable the Digital Channel
◼ To Set the Threshold
◼ Auto Arrangement Setting
◼ To Set the Waveform Display Size
◼ To Set the Label
◼ Group Setting
◼ Waveform Color of the Digital Channel

Rigol MSO8000 Series Specifications

General

Brand	Rigol
Model	MSO8000 Series
Category	Test Equipment
Language	English