Rockwell Automation Allen-Bradley PanelView Plus Series User Manual

Publication 2711P-UM001D-EN-P - September 2005
Connect Power 3-11
Startup Sequence
After a reset, the terminal performs a series of startup tests and then
either:
• runs the .MER application currently loaded in the terminal
• enters configuration mode
The action that occurs depends on what startup options are
configured for your terminal.
Refer to Chapter 8 on Troubleshooting for a list of startup, status and
error codes.

Rockwell Automation Allen-Bradley PanelView Plus Series Specifications

General

Brand	Rockwell Automation
Model	Allen-Bradley PanelView Plus Series
Category	Touch terminals
Language	English