Publication 2711P-UM001D-EN-P - September 2005
Preface ii
Manual Contents
Chapter Title Description
1 Overview Provides an overview of the terminals
including features and product
components.
2 Installation Gives instructions on how to install
the terminals in a panel or enclosure.
3 Connect Power Describes how to connect power and
reset the terminals.
4 Configuration Mode Shows how to use the PanelView
Plus configuration screens to
load/run applications and configure
terminal settings.
5 Install and Replace Components Shows how to install and replace
components of the terminal.
• Logic module
• RAM/Internal compact Flash
• Communication module
• Display module
• Battery
• Display module bezel
• Backlight
• AC power supply
• Product Label
• Keypad legend inserts
• External compact flash card
6 Terminal Connections Describes connections on the base
unit of the terminal and the
communication modules.
7 Transfer Files and Upgrade
Firmware
Provides information on transferring
files using an external compact flash
card and performing firmware
upgrades.
8 Troubleshooting Provides assistance on isolating and
correcting problems.
To Next Page
Loading...
Need help?
General
