183
System settings for the MV-8000
System settings for the MV-8000 Adding options
Checking the system status of the
MV-8000
You can check the current system status of the MV-8000, test the installed memory, or
initialize all settings of the MV-8000 to the factory-set state.
Viewing the system information
Here's how to check the MV-8000's internal software version, the amount of
currently-installed memory, and the options that are installed.
1.
Press .
The
SYSTEM MENU screen
(p. 319) will appear.
2.
With the cursor located in the upper row of icons, press (SysInfo).
Alternatively, select the SYSTEM INFO icon and press .
The
SYSTEM INFORMATION screen
(p. 326) will appear.
Version
Indicates the MV-8000's software version.
DIMM Size
Indicates the amount of memory installed in the MV-8000. When shipped from the
factory, 128 MB of memory is installed.
Wave Memory
Indicates the amount of memory available
for sampling or recording.
The displayed items are the remaining amount (units of MB), unused proportion
(percentage), and a bar graph. The black portion of the bar graph indicates the area
used for sample data, and the white portion indicates the area available for sampling.
Sequence Memory
Indicates the amount of memory available
for recording sequence data.
The displayed items are the unused proportion (percentage) and a bar graph. The
black portion of the bar graph indicates the area used for event data, and the white
portion indicates the remaining area available for sampling.
Options
Indicates the options that are installed in the MV-8000. Installed options are indicated
as “Installed,” and uninstalled options are indicated as “Not Installed.”
ECS05_manual_e.book 183 ページ ２００５年１１月３０日 水曜日 午前１１時１４分
To Next Page
Loading...
Need help?
General
