58
Editing a sampled sound
To create a partial that combines more than one sample (SMT)
You can create an SMT (Sample Mix Table) that combines up to four samples and uses
velocity to switch between them.
1.
Press (SMT).
The
PARTIAL EDIT (SMT) screen
(p. 289) will
appear.
2.
Move the cursor to any SMT number 1~4 and
press (Sample List).
The
SAMPLE LIST popup
(p. 281) will appear.
3.
Select a sample and press (Select).
The selected sample will be assigned to the Sample
you selected in step 2.
4.
Edit the parameters for each sample.
Adjust the sample's volume, pan, and pitch. For details on the parameters, refer to the
PARTIAL EDIT (SMT) screen
(p. 289).
5.
Set the Velocity Range parameter for each sample.
This lets you play different samples according to your playing dynamics. or details on
this parameter, refer to the
PARTIAL EDIT (SMT) screen
(p. 289).
You can use up to four
samples to create the partial.
ECS05_manual_e.book 58 ページ ２００５年１１月３０日 水曜日 午前１１時１４分
To Next Page
Loading...
Need help?
General
