Web-based Configuration Guide Wi-Fi Network Setup
153
11 Wi-Fi Network Setup
Note
● To manage other devices in the self-organizing network, enable the self-organizing network discovery
function. (See Switching the Work Mode)The wireless settings are synchronized to all wireless devices in
the network by default. You can configure groups to limit the device scope under wireless management.
For details, see 11.1 .
● The device itself does not support transmitting wireless Wi-Fi signals, and the wireless settings need to
be synchronized to the wireless devices in the network to take effect.
11.1 Configuring AP Groups
11.1.1 Overview
After self-organizing network discovery is enabled, the device can function as the master AP/AC to batch
configure and manage its downlink APs by group. Before you configure the APs, divide them to different groups.
Note
If you specify groups when configuring the wireless network, the configuration takes effect on wireless devices
in the specified groups.
11.1.2 Procedure
Choose Network > Devices > AP.
(1) View the information of all APs in the current network, including the basic information, RF information, and
model. Click the SN of an AP to configure the AP separately.
(2) Click Expand. Information of all the current groups is displayed to the left of the list. Click to create a
group. You can create a maximum of eight groups. Select the target group and click to modify the group
To Next Page
Loading...
Need help?
General