Ryobi Homelite RY48ZTR75/100 User Manual

Using the DMM to Measure Resistance
52
Before touching the probes of a DMM to
anything, be sure it is set to the correct setting.
Power must be OFF when measuring resistance
To measure DC voltage:
1. First, set the DMM to measure resistance
2. Touch the black probe to one point.
3. Touch the red probe to the other point.
The DMM in the photo displays 18.46 K ohms
“K” means Kilo or 1,000 or 18,460 Ohms
< Table of Contents

Ryobi Homelite RY48ZTR75/100 Specifications

General

Brand	Ryobi
Model	Homelite RY48ZTR75/100
Category	Lawn Mower
Language	English