Troubleshooting: General
• Follow the Block Diagram on the previous page.
• Check for loose/bad connections.
• Test the easiest components first. (power, key switch, DC-DC converter)
• Mower should be fully charged (if possible)
• Before disassembly:
– Attempt to charge mower (note any error LED indications)
– Check for voltage at charge port.
– Check USB Indicator and Headlights are functional (this tests the 48V-
12V converter)
• Remove Instrument Panel cover
– Test Key Switch
– Check all other connections while panel is removed.
8
< Table of Contents
To Next Page
Loading...
Need help?
General
