SAFETY INFORMATION
Cleaning the disc lens
•
If this unit still does not perform properly
although you refer to the relevant sections and to
“TROUBLESHOOTING” in this owner's manual, the
laser optical pickup unit may be dirty. Consult your
dealer or an Authorized Service Center for inspection
and cleaning of the laser optical pickup unit.
Disc handling
•
Handlethediscssothatngerprintsanddustdonot
adhere to the surfaces of the discs.
•
Always store the disc in its protective case when it is
not used.
Auto head cleaning
•
Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.
•
Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt
accumulated on the video heads after a long period of
use or the usage of rental or worn tapes can cause this
problem. If a streaky or snowy picture appears during
playback, the video heads in your unit may need to be
cleaned.
1. Please visit your local Audio/Video store and purchase
a good quality VHS video head cleaner.
2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.
Note
•
Remember to read the instructions along with the video
head cleaner before use.
•
Clean video heads only when problems occur.
IR signal check
If the remote control does not work properly, you can test
if the remote control sends out the infrared signal with a
digital camera (including built-in camera of
cellular phone). It will help to define the cause
of malfunction.
With a digital camera (including built-in
camera of cellular phone):
Direct a digital camera to remote control, press
and hold a button on remote control. If infrared
light appears through digital camera, the remote control is
working.
Supplied Accessories
remote control (NC184UH)
with batteries (AA, 1.5V x 2)
Servicing
•
Please refer to relevant topics on “TROUBLESHOOTING”
on pages 84-87 before returning the product.
•
If this unit becomes inoperative, do not try to correct the
problem by yourself. There are no user-serviceable parts
inside. Turn the unit to the standby mode, unplug the
power plug and please call our help line mentioned on
the front page to locate an Authorized Service Center.
Cleaning the cabinet
•
Wipe the front panel and other exterior surfaces of the
unit with a soft cloth.
•
Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near
the unit. Such chemicals may discolor the surface or
damage the unit.
Cleaning discs
•
When a disc becomes dirty, clean it with a cleaning cloth.
Wipe the disc from the center to out. Do not wipe in a
circular motion.
•
Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.
RCA audio/video cables
owner's manual
quick guide
Maintenance
To Next Page
Loading...
Need help?
General
