SPECIAL PLAYBACK
This feature allows you to assign a specific point on a disc
to be called back later.
1) During playback, press [DISPLAY] to bring up the
display menu.
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
to display the marker
list.
e.g.) DVD-video
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [K / L] to select a desired marker number.
When it reaches the desired point, press [OK].
1/ 5 1/ 5
DVD
---
---
---
---
---
---
1
2
3
4
5
6
Video
0:01:00 / 1:23:45
The title (track) number and the time will be displayed.
4) To return to the marker later:
Use [K / L] to select the desired marker number,
then press [OK].
Note
•
To clear a marker, select the marker number to be
cleared, then press [CLEAR].
•
All markers will be erased when you operate these
operations listed below.
– Opening the disc tray
– Turning the unit to standby / off
– Record on a recordable disc
•
You can mark up to 6 points.
Marker Setting
Repeat Playback
Available repeat function may vary depending on the discs.
1) During playback press [DISPLAY] to bring up the
display menu, then proceed to step 2) or press
[REPEAT] then proceed to step 3).
If the display menu is already shown, skip to step 2.
2) Use [{ / B] to select
to display the selection
menu.
1/ 5 1/ 5
DVD
0:01:00 / 1:23:45
Video
3) Use [K / L] to select a desired repeat type, then
press [OK].
The selected repeat playback will start.
e.g.) DVD-video
OFF
Title
Chapter
A – B
e.g.) audio CD
OFF
Track
All
A – B
e.g.) JPEG files
OFF
Track
All
Group
Title: The current title will be played back
repeatedly.
Chapter: The current chapter will be played back
repeatedly.
All: The current disc will be played back
repeatedly.
A-B: Desired section can be played back
repeatedly.
1) Use [K / L] to select “A-B”, then press
[OK].
2) Press [OK] at the desired starting point A.
3) Press [OK] at the desired ending point B.
Track: The current track or file will be played back
repeatedly.
Group: The current folder will be played back
repeatedly.
Note
•
Point B for the repeat A-B playback should be set within
the same title or track as point A.
•
To cancel the repeat playback, select “OFF” at step 3.
The repeat setting will also be cancelled when you stop
playback.
•
You cannot select “Group” during the random playback.
•
During the A-B repeat, if you reaches the point A with
any reverse playback, the reverse playback will be
cancelled and the A-B repeat playback resumes from
point A.
To Next Page
Loading...
Need help?
General
