Siemens LOGO! 230RC User Manual

LOGO! Manual
A5E00067781 01
130
5.1 Switching to Parameterization Mode
To switch to parameterization mode, press ESC and OK at
the same time:
I:123456
Q:1234 RUN
Mo 09:00
ESC OK
LOGO! switches to parameterization mode and displays
the parameterization menu:
>Set Clock
Set Param
The ’Set Clock’ menu item is executed only if your version
of LOGO! has a clock/time switch (those versions of
LOGO! that have a clock have the letter C in their name
e. g. LOGO 230RC). Set Clock allows you to set LOGO!’s
time switch.
5.1.1 Parameters
The following can be parameters:
 The delay times of a time relay.
 The switching times (cams) of a time switch.
 The threshold value of a counter.
 The monitoring time of an operating hours counter.
 The switching thresholds of a threshold switch.
Parameterizin
g
LOGO!

Siemens LOGO! 230RC Specifications

General

Inputs	8 digital inputs
Outputs	4 relay outputs
Mounting Type	DIN rail
Protection Type	IP20
Dimensions	90 x 72 x 55 mm
Output Current	10 A
Operating Temperature	0°C to 55°C
Power Supply	115/230V AC
Storage Temperature	-40°C to +70°C