LOGO! Manual
A5E00067781 01
30
3.2 Blocks and Block Numbers
In this chapter, we will describe how you can create exten-
sive circuits with the aid of LOGO!’s elements and how the
blocks are linked to each other and to the inputs and out-
puts.
For this purpose, please turn to Section 3.3. There we de-
scribe how to turn a conventional circuit into a LOGO! pro-
gram.
Blocks
A block in LOGO! is a function which converts input infor-
mation into output information. With earlier variants of
LOGO! you had to wire up the individual elements in the
control cabinet or terminal box.
When you program LOGO! you connect connectors with
blocks. To do this, simply select the connection you require
from the Co menu (Co stands for connector).
Logic operations
The simplest blocks are logic operations:
AND
OR
...
I1
I2
x
1
Inputs I1 and I2 are connected to the
OR block. The last input of the block
is not used and is therefore marked
with an x.
Q
We have made the special functions far more powerful
than before:
Current impulse relay
Counter
On delay
....
Chapter 4 provides a complete list of LOGO!’s functions.
Pro
rammin
LOGO!
To Next Page
Loading...
Need help?
General
