Step by step
Miscellaneous functions
112
The system will be available for remote configuration via
the application for a specified time period.
Fax received
If the system has a Fax/DID Module and a fax machine,
you can program a key to indicate when a fax was re-
ceived.
Required: Fax/DID Module installed and configured.
Confirm.
or
R Press the illuminated "FAX RECD" key.
Assigned group
1
The associated group feature provides quick access to
extensions that must communicate continually. With
the associated group feature several non-master exten-
sions can be assigned to one master telephone.
Required: The associated group feature must be con-
figured (see Programming an extension - associated
group, in the programming manual),
For example, by using "”Programming the keys”
Æ page 115" on system telephones, you can program
"”Direct communication call” Æ page 39" (code *80) +
destination extension (non-master in the master, and
master in the non-master) in the master extension.
When the programmed key is activated, the extensions
enter conversation mode (the speaker at the extension
called is activated). If the master extension initiates the
call, it is able to talk and listen. If a non-master extension
initiates the call, however, it can only listen since Mute
mode is activated at the master extension. To prevent
automatically enabling Mute mode, you must activate ""
(*96) for the master extension ”Handsfree answer-
back” Æ page 40 (*96).
FAX RECEIVED?
[1] There are 8 groups available with 16 extensions each. An associat-
ed group is assigned to each master telephone. An non-executive
extension can be used as secretary telephone for many groups at
the same time.
To Next Page
Loading...
Need help?
General