Miscellaneous functions
119
Step by step
Printing key labels
This feature allows you to print labels for programmable
keys according to the functions for which they are con-
figured, including Operator Terminal functions.
This service is available on HiPath 1100 Manager (Ad-
vanced Configuration -> Programming the keys -> Print-
ing key labels). It opens a Microsoft Word document
with a label template. Users can configure labels and
specify key names, font colors, font size, number of
copies to be printed, etc.
End Key
If this key is pressed when the extension is receiving an
incoming call, the call will be disconnected.
N Press this key.
Select and confirm.
or
*91 Enter the programming code a key.
S Select a programmable key. If the key is already pro-
grammed for another function, this information will be
displayed.
Confirm.
The number sequence assigned to the key is
called when the key is pressed.
For procedures with features that can be activat-
ed/deactivated, press the key to enable and
press it again to deactivate the feature.
The Procedure key can also be activated during a
call. The numbers are stored in the memory and
automatically sent as MF signals.
In addition, interdigit pauses can be set into the
dialing procedure.
The document is created in Microsoft Word 97
format, therefore, earlier versions of Word may
not be able to open the file.
*91= PROG KEY?
CHANGE KEY?
To Next Page
Loading...
Need help?
General