Step by step
Functions used when making calls
36
Override
1
The Override feature allows the user to override a con-
versation. A beep signals that the conversation in
progress has been overridden.
Required: There is a conversation in progress at the call
destination.
Select and confirm.
or
*62 Enter the code to confirm the override.
or
S Press the "OVERRIDE" key.
The called party and the caller hear a warning signal ev-
ery two seconds. If the called party is using a system
telephone with a display, it will show: "OVERRIDE:
(name or telephone number)" and "RELEASE?"
[ Start conversation.
Silent monitoring
2
Silent monitoring allows a user to override a call without
sending a beep (for certain countries only).
Required: There is a conversation in progress at the call
destination.
Select and confirm.
or
*944 Enter the code for Silent monitoring.
j Enter the extension (e.g., 11/101).
w [ Wait. Start monitoring.
[1] The user must have authorization from the system’s support tech-
nician in order to use this feature Programming manual, Program-
ming an extension - Override).
OVERRIDE?
(warning)
[2] The user must be authorized to use this feature (see Programming
manualProgramming an extension - Silent monitoring).
Within the system, Silent monitoring has the same restrictions as
the Conference and Override features.
If the monitoring or the monitored party change status, Silent mon-
itoring is canceled. This occurs, for example, when a call is placed
on hold.
SILENT MONITORING?
To Next Page
Loading...
Need help?
General