To Next Page

To Previous Page

Using the HiPath 1100 Features

Considerations

The system telephone model used for describing all of the HiPath 1100 features is the

OpenStage 15 T.

For each usage procedure, please check the model of the system telephone in use. To ad-

just device settings, consult the instruction manual.

For information on basic functions refer to the Quick Reference Guide for system tele-

phones.

The information in this document provides only general descriptions of the features. The

actual features may not correspond exactly to the descriptions herein and, furthermore,

they are subject to changes to the extent that products continue to be developed.

The selection of features to be provided is not binding unless explicitly established in the

terms of the contract.

Numbering plan

A Numbering plan assigns extensions, external lines, and groups - as well as other numbers

that can be selected with features and programming codes - to execute specific functions.

Note: The number of external lines and extensions available depends on the system’s con-

figuration.

Description HiPath 1120 HiPath 1150 HiPath 1190

External line 801 to 808 801 to 832 801 to 845

Extension, including S

11 to 30 11 to 60

610 to 645

101 to 240

Groups of external lines 0 or 890 to 899

Call groups (CG) 770 to 779

Hunt groups (HG) 780 to 789

UCD subscriber groups 790 to 799

Carrier 9

EVM – Default internal number 790

EVM – Message ports 7491 and 7492

EVM – Virtual Ports 744 to 747

Fax/DID – Virtual message ports 740 to 743

USB/CAPI line 10 100

Substitution for * and # 75 and 76 (accordingly)

Siemens OpenStage 15 T User Manual

Other manuals for Siemens OpenStage 15 T