Commissioning the device
4.4 SIMATIC IPC Wizard
SIMATIC IPC427D
56 Operating Instructions, 05/2017, A5E31347215-AB
With SIMATIC IPC Wizard for SIMATIC Industrial PCs, you install device-specific software
and drivers for operating your device.
The SIMATIC IPC Wizard recognizes the existing hardware components and automatically
installs the associated software.
Industrial PCs with pre-installed software are already equipped with the SIMATIC IPC
Wizard, which runs automatically on initial start-up.
On SIMATIC Industrial PCs without pre-installed software, the SIMATIC IPC Wizard can be
installed from the supplied USB stick.
The SIMATIC IPC Wizard consists of the following software components:
● KeyTools_Phone
● UPDD (Universal Pointing Device Driver)
● Panel PC Tools
● OSK for Login (On Screen Keyboard) {"OSK"}
● HMITouchInput
The functions are described in the SIMATIC IPC Wizard operating manual. You will find the
operating manual:
● On the supplied USB stick.
● In the IPC Wizard installation folder on the device, after successful installation of the IPC
Wizard.
Note
If the IPC Wizard is already
installed, setup can be restarted with "Start > Siemens
Automation> SIMATIC > IPC_Wizard".
The following options are available:
Modify: Add or deselect features
Repair: Repair all installed features
Remove: Remove IPC Wizard including all components
To Next Page
Loading...
Need help?
General
