Siemens SIMATIC IPC477E PRO User Manual

Maintaining and repairing the device
8.5 Installing the software
SIMATIC IPC477E PRO
Operating Instructions, 08/2017, A5E39912462-AA
97
8.5.1.4
Windows Embedded Standard
If your software becomes corrupt for any reason, you can re-install it using the USB stick
provided. The USB flash drive contains an image file for the device memory with the original
software package (operating system with installed hardware drivers).
Note
You require a USB keyboard and the supplied USB flash drive to reinstall the operating
system. Before performing the new installation, you should check the date and time set in
the BIOS Setup, "Main" menu, and correct these
if necessary.
Procedure - Changing the system language
You can change the language using the supplied USB flash drive. The USB stick contains
the required language packages and help for changing the system language.
Note
Note the license terms of Windows Embedded Standard 7
Note the license terms for Windows Embedded Standard
7 and especially the extended
software terms of the Siemens
AG.
You can find the license terms in the delivered document "MICROSOFT SOFTWARE
LICENSE TERMS for Windows
Embedded Standard 7" and in the system drive under
\
Windows\System32\license.rtf.
Procedure - Changing the system language
1. Connect the supplied USB flash drive to a free USB port of the device.
2. Restart the device and press "ESC" to access the BIOS.
3. Switch to the "Boot" menu and select the setting "USB Boot" = "Enabled".
4. Switch to the "Exit" menu and select "Exit Saving Changes".
5. Restart the device and press the "ESC" key and then enter the "Boot Manager" menu.
6. Select the USB flash drive and press "Enter" to boot from this.
7. Follow the instructions on the screen.
8. After selecting the menu dialog language, select the menu item "Manage language
packages".
Depending on the current language setup, you have the following options in the "Manage
language packages" menu:
– Display language settings
– Install language
– Change language
– Uninstall installed language

Siemens SIMATIC IPC477E PRO Specifications

General

Brand	Siemens
Model	SIMATIC IPC477E PRO
Category	Industrial PC
Language	English