Hardware Information
7-3
SIMATIC Rack PC IL 40 SManual
A5E00200171-01
7.2 Overview of the Components and Ports
Component/Port Description Parameters
Chipset Intel 845GE • CPUs with 533 / 400 MHz PSB,
SDRAM DDR 333/266 unbuffered,
without ECC
BIOS Update via software
CPU Pentium 4 / Celeron
(type mPGA478)
• Upgradeable
Memory DIMM modules • Data capacity of 64 bits
• 2.5 V
• SDRAM to PC2700/2100
specification
• 333/266 MHz bus speed
*3
• 2 DIMMs can be used
• easy to exchange
• variable from 128MB to 2 GB
Graphics AGP slot • AGP slot supports 1x/2x/4x modes
Hard disk
*3
Master or slave on primary EIDE port
ATA 33/66/100 mode
• Ultra DMA capable
CDROM/
CD R/RW
*3
Master or slave on secondary EIDE port • 48 speed (CD ROM) or
48x24x8 (CD R/RW)
DMA capable
Floppy
*3
Port for 34-pin ribbon cable • 1.44 MB
Keyboard Port for PS2 keyboard • Standard
Mouse PS2 mouse port • Standard
Serial/COM1
Serial/COM2
Serial interfaces for devices such as a
modem, a mouse, a printer
COM2 (optional)
• Standard 9-pin D subminiature (pin)
• Standard
Parallel LPT, Standard, bidirectional, EPP and
ECP mode
• 25 pin subminiature Cannon
connector
USB Universal Serial Bus • four high current (500mA) USB ports
Ethernet 10BaseT/100Base-TX (Intel Kinnereth,
DA82562ET)
• 10/100 Mbps, potentially isolated *
1
*
1
Electrically isolated in a safety extra-low voltage circuit (SELV)
*
2
Depending on the CPU type
*
3
Depending on the selected device configuration
To Next Page
Loading...
Need help?
General
