Features Description
Maximum deviation per day
with
supply voltage switched on and switched off at
0 to 55° C
±9 s
Backup time Typically 5 days (at 0 to 25° C)
Charging time 1 h
With power OFF
The
Control Unit clock continues to operate with the POWER OFF for the duration of the battery
backup time (excluding software clock). The buffer is recharged in the POWER ON state. If
the real-time clock backup time is exceeded, the time is reset. If the SIMOTION D410 is reset
to its factory settings, the clock is also reset to the "default setting when delivered".
7.7 Shipping and storage conditions
The following information applies to modules transported and stored in the original
packaging.
Table 7-16 Shipping and storage conditions
Type of condition Permissible range
Free fall, checked according to
DIN EN60721-3-2, Class 2M2
≤ 1 m
Permissible ambient temperature
during storage and transport
-40° C to +70° C
Atmospheric pressure 700 to 1060 hPa (equals a height of up to 3000 m)
Relative humidity 5% to 95%, without condensation
7.8 Mechanical and climatic ambient conditions
Conditions of use
SIMOTION
D410 is designed for use in stationary, weather-protected locations. The conditions
of use exceed the requirements of the environmental test according to DIN IEC 60068‑2‑2.
SIMOTION D410 meets the conditions of use, Class 3C3, according to DIN EN 60721-3-3
(operating locations with high traffic densities and in the immediate vicinity of industrial
equipment with chemical emissions).
Technical data
7.8 Mechanical and climatic ambient conditions
SIMOTION D410
92 Manual, 04/2014
To Next Page
Loading...
Need help?
General
