22080 AUXFU_PREDEF_SPEC C04 H2, K1
- Output specification DWORD PowerOn
-
- 301 0x81, 0x81, 0x81,
0x81, 0x81, 0x8021,
0x8021, 0x8021,
0x8021,
0x0, 0x0, 0x0,
0x0, 0x0,
0x8000,
0x8000,
0x8000...
0x77FFF,
0x77FFF,
0x77FFF,
0x77FFF,
0x77FFF,
0x7FFFF,
0x7FFFF, 0...
1/1 M
Description: Specification of the output behavior of the predefined auxiliary functions.
Bit 0 = 1 Acknowledgment "normal" after an OB1 cycle
Bit 1 = 1 Acknowledgment "quick" with OB40
Bit 2 = 1 No predefined auxiliary function
Bit 3 = 1 No output to the PLC
Bit 4 = 1 Spindle reaction after acknowledgment by the PLC
Bit 5 = 1 Output before the motion
Bit 6 = 1 Output during the motion
Bit 7 = 1 Output at block end
Bit 8 = 1 No output after block search types 1, 2, 4
Bit 9 = 1 Collection during block search type 5 (SERUPRO)
Bit 10 = 1 No output during block search type 5 (SERUPRO)
Bit 11 = 1 Cross-channel auxiliary function (SERUPRO)
Bit 12 = 1 Output via synchronized action
Bit 13 = 1 Implicit auxiliary function
Bit 14 = 1 Active M01
Bit 15 = 1 No output during running-in test
Bit 16 = 1 Nibbling off
Bit 17 = 1 Nibbling on
Bit 18 = 1 Nibbling
22090 AUXFU_PREDEF_SIM_TIME C04 H2, S1
- Acknowledgment time DWORD PowerOn
-
- 64 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0,, ...
0 0x7FFFFFF 2/2 M
Description: Acknowledgment time for auxiliary functions in ms.
See MD22010 $MC_AUXFU_PREDEF_TYPE[n] (auxiliary function type)
22254 AUXFU_ASSOC_M0_VALUE C01, C03, C10 H2, K1
- Additional M function to stop a program DWORD PowerOn
-
- - -1, -1, -1, -1, -1, -1, -1,
-1...
- - 2/2 M
Description: This machine data defines an additional, predefined M function, which behaves in the
same way as M0. The value of the machine data corresponds to the number of the
auxiliary M function.
Predefined M numbers, such as M0, M1, M2, M3, etc., are not allowed.
Restriction:
Machine data
3.3 Channel-specific machine data
Parameter Manual
Parameter Manual, 08/2015, 6FC5397-8EP40-0BA1 169
To Next Page
Loading...
Need help?
General
