Load Weighing Device
September 29,2021 ©2021 Smartrise Engineering, Inc. All Rights Reserved Page 17
14. From the START TIMERS menu, scroll and select Brake Pick (Auto).
Figure 48: START TIMERS Menu – Brake Pick (Auto)
15. From the BRAKE PICK DELAY (AUTO) menu, scroll and select the brake pick speed to 0.0
msec.
Figure 49: BRAKE PICK DELAY (AUTO) Menu
16. Scroll right and press Save.
17. Press the left button until the START TIMERS menu displays.
18. From the START TIMERS menu, scroll and select Brake Pick (Insp).
Figure 50: START TIMERS Menu – Brake Pick (Insp)
19. From the BRAKE PICK DELAY (INSP) menu, scroll and select the brake pick speed to 0.0
msec.
Figure 51: BRAKE PICK DELAY (INSP) Menu
20. Scroll right and press Save.
21. Press the left button until the SETUP menu displays.
To Next Page
General
