EasyManuals Logo

SOMFY SLIM IO RECEIVER PERGOLA+PLUG User Manual

SOMFY SLIM IO RECEIVER PERGOLA+PLUG
Go to English
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
EN
Slim io Receiver Pergola + Plug
22 Copyright
©
2017 SOMFY ACTIVITE SA, Société Anonyme.. All rights reserved.
1. INTRODUCTION
1.1. SCOPE OF APPLICATION
The Slim io Receiver Pergola + Plug is a receiver equipped with io homecontrol® Radio Technology.
It is used to control the majority of motorised pergolas with standard motors supplied with 230V
(please contact your dealer for further information). The Slim io Receiver Pergola + Plug is used to
open and close these pergolas.
Its small size enables it to be discretely installed near the product it is controlling through a direct
supply cable connection.
The Slim io Receiver Pergola + Plug can be used as:
individual control - one Slim io Receiver Pergola + Plug io is controlled by one control point,
multiple control - one Slim io Receiver Pergola + Plug is controlled by several control points,
group control - several Slim io Receiver Pergola + Plug are controlled by a single control point.
The Slim io Receiver Pergola + Plug can be controlled either by one control point or by an automatic
control device.
1.2. LIABILITY
Before installing and using the receiver, please read these instructions carefully. In addition to the
instructions provided in this guide, please also comply with the instructions set out in the enclosed
Safety instructions document.
The receiver must be installed by a home motorisation and automation professional, in accordance
with Somfy’s instructions and the applicable regulations in the country of installation.
Any operation of the receiver outside the scope of application described above is prohibited. Such
operation shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any failure
to comply with the instructions given herein and in the enclosed Safety instructions document.
After installing the receiver, the installer must inform his customers of the operating and
maintenance conditions for the receiver and must pass the operating and maintenance
instructions on to them, as well as the enclosed Safety instructions document. Any After-Sales
Service operation on the receiver requires intervention by a home motorisation and automation
professional.
Should any doubt arise during installation of the receiver or for additional information, consult a
Somfy contact or visit www.somfy.com.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SOMFY SLIM IO RECEIVER PERGOLA+PLUG and is the answer not in the manual?

SOMFY SLIM IO RECEIVER PERGOLA+PLUG Specifications

General IconGeneral
BrandSOMFY
ModelSLIM IO RECEIVER PERGOLA+PLUG
CategoryReceiver
LanguageEnglish

Related product manuals