SOMFY SLIM IO RECEIVER PERGOLA+PLUG User Manual

79
NL
Slim io Receiver Pergola + Plug
Copyright
©
2017 SOMFY ACTIVITE SA, Société Anonyme.. All rights reserved.
6) Druk gedurende ≈7 s op de PROG toets van het lokale
Somfy io homecontrol®-bedieningspunt tot het gemotoriseerd
systeemtwee keer op en neer beweegt.
De ontvanger is gereset in de oorspronkelijke configuratie.
7. TECHNISCHE GEGEVENS
Netvoeding 220 - 240V / 50Hz
Beveiligingsklasse IP 54
Elektrische isolatie Klasse I
Maximum aantal bedieningspunten
en sensoren
9
Radiofrequentie 868-870 MHz io homecontrol® tweerichting
driebanden
Gebruikte frequentiebanden en maximaal vermogen 868,000 MHz - 868,600 MHz PAR < 25mW
868,700 MHz - 869,200 MHz PAR < 25mW
869,700 MHz - 870,000 MHz PAR < 25mW
Bedrijfstemperatuur - 30 °C tot + 70 °C
Aantal bewegingscycli 10000
Vervuilingsgraad 2
Maximaal vermogen 690 W
Nominale stroom 3 A
Nominale schokbestendigheidsspanning 2500 V
Servicetype S3
Type schakelaar

SOMFY SLIM IO RECEIVER PERGOLA+PLUG Specifications

General

Brand	SOMFY
Model	SLIM IO RECEIVER PERGOLA+PLUG
Category	Receiver
Language	English

Summary

General Information

Safety Instructions

Highlights safety risks including Danger, Warning, Precaution, and Attention levels.

Introduction

1.1. Scope of Application

Details the product's intended use for motorised pergolas and control methods.

1.2. Liability

Outlines user responsibilities and Somfy's limited liability regarding installation and use.

Installation

2.1. Installation Recommendations

Specifies minimum distances between receiver, ground, and radio control points for optimal performance.

2.2. Fitting the Slim io Receiver Pergola + Plug

Step-by-step guide for physically connecting the receiver between the motor and power supply cables.

Wiring

Wiring Precautions

Safety and installation advice for wiring, including cable protection and accessibility.

Commissioning

4.1. Identifying Setting Steps Already Completed

Checks motor reaction to determine if linear travel and control points are set. Includes outcomes for brief movement or no movement.

4.2. Pre-programming the Somfy io Local Control Point

Procedure to pair a local control point with the receiver by pressing Up and Down buttons.

4.3. Checking Motor Direction of Rotation

How to verify and correct the motor's direction using the control point buttons.

4.4. Setting the Time of Functioning

Explains automatic and manual modes to set motor running time for optimal operation.

4.5. Programming the First Somfy io Local Control Point

Instructions for programming a new control point via PROG button or after power loss.

Operation and Maintenance

5.1. Up and Down Buttons

Basic functions to raise or lower the motorised product using the control point.

5.2. Stop Function

How to stop the motorised product's movement by pressing the 'my' button.

5.3. Favourite Position (my)

Allows setting, modifying, using, and deleting an intermediate 'favourite' position via the 'my' button.

5.4. Adding/Deleting Somfy io Control Points and io Sensors

Refers to a separate guide for procedures on adding or removing control points and sensors.

5.5. Replacing a Lost or Broken io-homecontrol® Somfy Control Point

Advises consulting a professional for replacing lost or damaged control points.

Tips and Recommendations

6.1. Questions on the Slim io Receiver Pergola + Plug

Provides a troubleshooting table with observations, possible causes, and solutions for common issues.

6.2. Restoring the Original Configuration

Step-by-step guide to reset the receiver to factory settings, deleting all programmed data.

Technical Data

7. Technical Data Details

Contains specifications like power supply, frequency bands, operating temperature, and IP rating.