Sony DFS-900M User Manual

164
Tally Output Settings
Chapter 7 External Control Interface Settings
Tally Output Settings
This switcher can output 32 different tally signals. You can
assign the following tally output signals to tally/GPI
output pins of the TALLY/GPI OUT connector.
For more information about the pins of the TALLY/GPI
OUT connector, see “Pin Assignments” (page 211). For
more information about signal connection, see “Example
Connection of Tally/GPI Output” (page 214).
• R-BLK: Red tally to BLACK
• R-In01 to 24: Red tally to In01 to In24
• R-Stl1 to 4: Red tally to Stl1 to Stl4
• R-Mat1 to 4: Red tally to Mat1 to Mat4
• R-Rsv01 to R-Rsv07 (or 06)
1)
: Reserved for future
expansion
• R-ME: Red tally to M/E (only when using the BKDF-
902)
• G-BLK: Green tally to BLACK
• G-In01 to 24: Green tally to In01 to In24
• G-Stl1 to 4: Green tally to Stl1 to Stl4
• G-Mat1 to 4: Green tally to Mat1 to Mat4
• G-Rsv01 to G-Rsv06 (or 05)
2)
: Reserved for future
expansion
•Play: See “To set the GPI output” (page 166)‘
• G-ME: Green tally to M/E (only when using the BKDF-
902)
•Alarm: Alarm
1) When using the BKDF-901: R-Rsv01 to R-Rsv07
When using the BKDF-902: R-Rsv01 to R-Rsv06
2) When using the BKDF-901: G-Rsv01 to G-Rsv06
When using the BKDF-902: G-Rsv01 to G-Rsv05
To change tally output settings
Use the Tally sub menu.
To display the Tally sub menu
In the External Connections and Power Block, press the
GPI button twice in quick succession.
F2 F GPI input
function
M/E Trn, M/E Cut, M/E
Mix, M/E Wipe, M/E
DME, M/E FAM, M/E
NAM, P/P Trn, P/P Cut,
P/P Mix, P/P Wipe,
DSK1 Cut, DSK1 Mix,
DSK2 Cut, DSK2 Mix,
FTB, SEQ Play
Knob Parameter Description Settings
TALLY/GPI OUT connector

Sony DFS-900M Specifications

General

Brand	Sony
Model	DFS-900M
Category	Switch
Language	English