22
BKDF-902 1.5M/E Control Panel
Chapter 2 Names and Functions of Parts
1 External Connections and Power
Block
See descriptions for the BKDF-901 in “1 External
Connections and Power Block” (page 14).
2 KEYER Block
See descriptions for the BKDF-901 in “2 KEYER Block”
(page 14).
3 Key/AUX (Auxiliary) Bus Control Block
a Key delegation buttons
See descriptions for the BKDF-901 in “3 KEY
DELEGATION Block” (page 15).
b AUX (Auxiliary) delegation buttons
Select the AUX bus output (AUX1 to AUX10) to which
one of the KEY/AUX bus selection buttons or of the output
selection buttons (MV1/K OUT, KEY SRC) is assigned.
Signals selected with the KEY/AUX bus selection buttons
or the output selection buttons are output to the bus
selected here.
Press one of the buttons to display an AUX bus output
menu that allows you to select the source, format, and level
of AUX output signals.
When optional expansion boards are not installed, the
AUX3 to AUX10 buttons are disabled.
c KEY/AUX (auxiliary) bus selection buttons
Select the output of the bus selected with the key
delegation buttons or the AUX delegation buttons.
The signals which can be selected with each button are the
same as the signals selected by the corresponding buttons
in the M/E cross-point bus block (see page 23).
d Output selection buttons
Select the output of the bus selected with the key
delegation buttons or the AUX delegation buttons.
MV1 (multi-view 1)/K OUT (key output) button:
Selects the multi-view 1 output when pressed with the
SHIFT button unlit. Selects the key output of the M/E
bus when pressed with the SHIFT button lit.
MV2 (multi-view 2)/CLN (clean) button: Selects
multi-view outputs 2 when pressed with the SHIFT
button unlit. Selects clean outputs when pressed with
the SHIFT button lit.
KEY SRC (key source) button: Selects key source
outputs. This button is also used to restore the default
values for all settings (to reset all settings) in a sub
menu of the DME menu (see page 134), to limit the
effective range of the fader lever (see page 113), or to
recall or delete events (see page 154 or page 155).
M/E / M/E PV (M/E preview) button: Selects the
program output of the M/E bus when pressed with the
SHIFT button unlit. Selects the preview output of the
M/E bus when pressed with the SHIFT button lit.
PGM (program)/PVW (preview) button: Selects the
program output when pressed with the SHIFT button
unlit. Selects the preview output when pressed with the
SHIFT button lit.
e SHIFT button
Switches the functions of the MV1/K OUT button, MV2/
CLN button, M/E / M/E PV button, and PGM/PVW
button.
This button also allows you to switch between the two
signals assigned to each KEY/AUX bus selection button.
1Key delegation buttons 2AUX delegation buttons
3KEY/AUX bus selection buttons
4Output selection buttons
5SHIFT button
Note
To Next Page
Loading...
Need help?
General
