89
Basic Switcher Settings
Chapter 3 Preparations
a) Valid only when the BKDF-911 2 SD Video Input Board is installed
Making Settings Related to Output Signals
Selecting output signals for AUX output
Including the four standard video outputs (PGM1/2 and AUX1/2), you can use
up to 12 video outputs by adding option boards.
You can assign input signals, internally processed signals, or program outputs
to the output connectors of AUX1, AUX2, and output expansion boards (SDI,
SD VIDEO, and DVI).
You can also assign multi-view outputs to those output connectors when you
install the optional BKDF-950 Multi Viewer Board in the processor unit.
When the input is SDI signals (HD-SDI or SD-SDI), you can select whether to
output ancillary data such as multiplexed audio and timecode.
The signals output from the PGM1 and PGM2 outputs cannot be changed.
1
When using the BKDF-901: Press the AUX button.
When using the BKDF-902: Press one of the AUX1 to AUX10 buttons.
The AUX3 to AUX10 buttons that correspond to channels on installed
output expansion boards are enabled (buttons with no corresponding
channels are not enabled). When you are using the BKDF-961 and
BKDF-962 output expansion boards, some output channel numbers are
invalid. For details, see page 39.
The Aux (AUX output assignments) sub menu appears in the display panel.
F4 Hue Adjust the hue 0.0 to 359.5
Knob Parameter Description Setting range
Tips
Note
BKDF-901
BKDF-902
Note
To Next Page
Loading...
Need help?
General
