Sony DFS-900M User Manual

170
Status Information
Chapter 8 Other Operations and Settings
To update the system
In the Update sub menu, adjust the following parameters,
and then execute the operation.
a) Reserved for future expansion
To display or hide the GUI menu cursor
Press the F4 knob and hold it down for one second or
longer.
To update the software from the Update sub
menu
For information about software updates contact a Sony
service representative.
Status Information
The Status sub menu of the Setup menu allows you to
check alarms, software versions, and the status of the
option boards installed in the switcher.
To display the Status sub menus
1 When using the BKDF-901: If the SHIFT button of
the DME/SETUP block is not lit, press it to light it.
When using the BKDF-902: Skip to step 2.
2 Press the STATUS button.
The most recently used sub menu appears in the
display panel.
3 Press the h and H buttons in the numeric keypad
until the desired sub menu appears.
Knob Parameter Description Settings
F1 CP Update the
control panel
software.
–
F3 TG Update firmware. DSP, CPU,
Main_IO, XPT,
KEYER, Comb,
DME, MV, SDI_I,
SDI_O
AI
a)
, AO
a
),
DVI_I
a)
, DVI_O
a)
F4 Cursor Turn the GUI
menu cursor on
or off.
–
BKDF-901
BKDF-902

Sony DFS-900M Specifications

General

Brand	Sony
Model	DFS-900M
Category	Switch
Language	English