EasyManuals Logo

Sony STR-DA5800ES User Manual

Sony STR-DA5800ES
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
100
GB
Audio Settings
You can adjust settings for the audio to suit
your preference.
The D.L.L. function is Sony proprietary
technology that allows low quality digital
audio signals and analog audio signals to be
played back with high quality sound.
x Off
x Auto 1
This function is available for lossy
compression audio formats and analog audio
signals.
x Auto 2
This function is available for Linear PCM
signals, as well as lossy compression audio
formats and analog audio signals.
Notes
This function may not work, depending on the
content via a USB device, or a home network.
This function works when “A.F.D. Auto” is
selected. However, this function does not work in
the following cases.
Linear PCM signals with a sampling frequency
of other than 44.1 kHz are being received.
Dolby Digital Plus, Dolby Digital EX, Dolby
TrueHD, DTS 96/24, DTS-ES Matrix 6.1, DTS-
HD Master Audio, or DTS-HD High Resolution
Audio signals are being received.
Lets you set the sound optimizer function
(page 66).
x Off
x Low
x Normal
Lets you adjust the bass, middle*, and treble
level for each speaker (page 66).
(* for the center speaker only.)
The LFE Time Alignment function allows you
to shift the output timing of the LFE channel
by –20ms (delay) to +20ms (forward) for other
channels. This function is effective for
adjusting content in which the LFE channel
phase has a gap from that of other channels.
Note
This function does not work in the following cases.
“MULTI IN” is selected.
“2ch Analog Direct” is being used.
Lets you prevent signals from being output via
the PRE OUT SUBWOOFER jacks.
x Off
The PRE OUT SUBWOOFER jacks output
signals.
x On
The PRE OUT SUBWOOFER jacks do not
output signals.
Note
This function does not work in the following cases.
Headphones are connected.
“2ch Analog Direct” is selected.
“2ch Stereo” is selected.
A speaker pattern without a subwoofer is
selected.
Lets you select the language you want when
you listen to the dual audio of a digital
broadcast when available. This feature only
functions for Dolby Digital sources.
Digital Legato Linear (D.L.L.)
Sound Optimizer
Equalizer
LFE Time Alignment
Subwoofer Muting
Dual Mono

Table of Contents

Other manuals for Sony STR-DA5800ES

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony STR-DA5800ES and is the answer not in the manual?

Sony STR-DA5800ES Specifications

General IconGeneral
Display-
Night modeNo
Product colorBlack
Audio decodersDolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS Neo:6, DTS-ES, DTS-HD
RS-232 interfaceYes
Apple docking compatibilityNot supported
Consumer Electronics Control (CEC)BRAVIA Sync
Connectivity technologyWired
12V trigger ports quantity3
Speakers connectivity typeRCA
Audio output channels9.2 channels
Power output per channel (20-20KHz@8 Ohm)125 W
HDMI in9
Audio (L/R) in1
Composite video in5
Ethernet LAN (RJ-45) ports4
Component video (YPbPr/YCbCr) in2
Headphone connectivity3.5 mm
Supported radio bandsAM, FM
Preset stations quantity60
Supported video modes1080p
Weight and Dimensions IconWeight and Dimensions
Depth420 mm
Width430 mm
Height187.5 mm

Related product manuals