51
GB
Enjoying images/sound
Enjoying images/sound
from connected
equipment
1 Select “Watch” or “Listen” from
the home menu, then press .
The menu item list appears on the TV
screen.
2 Select the equipment you want,
then press .
3 Turn on the equipment and
start playback.
4 Press +/– to adjust the
volume.
To select the input source
You can turn the INPUT SELECTOR dial on
the receiver or press the input buttons on the
remote control to select the equipment you
want.
To select the input source for zone 2 or zone 3,
press ZONE SELECT on the receiver or
ZONE on the remote control to select zone 2
or zone 3 first (“ZONE 2 [input name]” or
“ZONE 3 [input name]” appears on the display
window).
Tips
You can adjust the volume differently using the
MASTER VOLUME knob on the receiver or the
+/– button on the remote control.
• To turn the volume up or down quickly
– Turn the MASTER VOLUME knob quickly.
– Press and hold the +/– button.
• To make fine adjustment
– Turn the MASTER VOLUME knob slowly.
– Press the +/– button and release it
immediately.
To activate the muting function
Press on the remote control. To cancel,
press on the remote control again or press
+ to raise the volume. If you turn the
receiver off while the sound is muted, the
muting selection is cancelled.
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
Enjoying images/sound
ZONE
HOME
V/v/B/b,
Input
buttons
To Next Page
Loading...
Need help?
General
Weight and Dimensions
