79
GB
Using Other Features
Notes
• The “Auto” setting is effective only when “Control
for HDMI” is set to “On.” If “Control for HDMI”
is set to “Off,” the receiver performs the same
operations in “Auto” as in “On.”
• In the standby status where other function such as
Network Standby works, the power consumption is
not reduced, even when “Pass Through” is set to
“Auto.”
Switching between
digital and analog audio
When you connect equipment to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
1 Select the input source using
INPUT SELECTOR on the
receiver.
2 Press INPUT MODE on the
receiver.
The selected audio input mode appears in
the display window.
•AUTO
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
When TV input is selected, priority is
given to the Audio Return Channel
(ARC) signals. If your TV is not
compatible with Audio Return Channel
(ARC), the digital optical audio signals
are selected.
If the Control for HDMI functions of
both the receiver and the TV are not
activated, the Audio Return Channel
(ARC) function does not work.
On When the receiver is in
standby mode, the receiver
outputs HDMI signals from
the receiver’s HDMI OUT A
jack.
Off The receiver does not output
HDMI signals when in
standby mode. Turn on the
receiver to enjoy the
connected equipment’s
source on the TV. This
setting saves power in
standby mode, compared
with the “On” setting.
Parameter Explanation
INPUT MODE
INPUT SELECTOR
continued
To Next Page
Loading...
Need help?
General
Weight and Dimensions
